Verification collar
Six year maintenance verification collar
Seats between valve and cylinder. It cannot be removed without discharging the unit, which is the entire point of it.
Quantity breaks
| Quantity | Per unit | Order total |
|---|---|---|
| 100 | $0.31 | $31.00 |
| 250 | $0.28 | $70.00 |
| 500 | $0.25 | $125.00 |
| 1,000 | $0.23 | $230.00 |
Breaks apply automatically at checkout. Ordering 1,200 gets the 1,000 break on all 1,200 units, not the 500 break.
Order
$31.00 $0.31 per unit
You will set your company name, licence line, and technician fields on the next step, and see a print accurate proof before paying.
Specification
| SKU | COL-FE-6YR |
|---|---|
| Substrate | Card stock |
| Size | Fits 2in valve neck |
| Serialized | No |
| Minimum order | 100 units |
| Fits | Fire extinguishers |
| Governing standards | NFPA 10, OSHA 1910.157 |
What this is for
Sized for a two inch valve neck and seated between the valve and the cylinder, so it cannot come off without the unit being discharged. That is what makes it evidence rather than decoration. Buy these against your six year population rather than your annual one - most routes need a fraction of the tag count.
In service
Sits between the valve body and the cylinder neck, so it cannot be removed without taking the valve off - which is the entire point. It records the six year internal maintenance, and its presence is the evidence.
How it fails
Collars do not wear out, they go missing. A servicer who breaks one getting the valve off and does not have a spare leaves no record of the internal, and the next inspection cannot tell a completed service from a skipped one.
Who fills it in
Only the licensed servicer performing the internal examination, once every six years, at the bench. Nobody writes on a collar in the field.
Common questions
How long does card stock last on fire extinguisher?
About twelve months indoors, matching an annual service cycle. Not for wet, exterior, or wash down locations. Once a card tag has gone soft the record is effectively gone with it. For fire extinguisher specifically, the question to ask is where the units actually sit: the same stock behaves very differently in a conditioned corridor and in an unconditioned plant room.
What does COL-FE-6YR cost at my volume?
$0.31 per unit at 100, falling to $0.23 at 1,000 - about 26 percent less per unit at the top break. The full table is on this page and there is no quote step. The entry break is 100 units and the top break is 1,000. Per unit that is a 1.3 times difference, which is worth doing the arithmetic on rather than guessing: take your annual device count, add what you expect to add this year, add about ten percent for spoilage and re-tags, and order to the break that number crosses. Buying past it is buying storage rather than savings, and stock held for years is stock that outlives a licence renewal or a change of address.
How fast will COL-FE-6YR ship?
Production runs three to four business days plus transit, which is the fastest path on the site. Card and Tyvek print and cut in one pass with no cure step. You approve a print accurate proof before payment is taken, and that proof comes from the same engine that generates the file the press receives, so what you approve is what gets printed. There is no separate proofing round trip by email.
Can COL-FE-6YR be serialized?
This product is not serialized. It carries your imprint and the service fields but no unique scannable code, because its function is evidence of a single event rather than a device history. Where you want a scannable record for the same equipment, pair it with a serialized tag on the same visit.
Proof approval, reprints and what happens if an order arrives wrong are the same for every product: how ordering works.