A rigid engraved plate identifying equipment, a circuit, or a disconnect, readable for the life of the asset.
2 products · substrates: phenolic (three ply), anodised aluminium, stainless steel
Engraved rigid plate, usually phenolic or anodised aluminium, where the text is cut into the material rather than printed on it. Nothing to fade, nothing to lift, and legible after a fire that would have destroyed a printed label.
Choose a nameplate for identification that must outlive the equipment it is on - panels, disconnects, valves, circuits. If the text will never change and it needs to be right in twenty years, engraving is the only form that qualifies.
Engraving is permanent, which means a wrong plate is scrap rather than an edit. Panel schedules change more often than anyone expects, so the text has to describe what the thing IS rather than what it currently feeds.
NPL-PANEL-PHEN
Engraved through the cap layer so the legend cannot wear off. Standard for panel and disconnect identification.
Substrate Phenolic (three ply) Size 3in x 1in Fits Electrical panels Serialized No
In stock
$2.75/ unit
50 $2.75
100 $2.45
250 $2.20
500 $2.04
NPL-VALVE-ALU
Photo anodised, not printed. Survives outdoor and chemical exposure for the life of the asset.
Substrate Anodised aluminium Size 2in x 1in Fits Pipe runs Serialized Yes
In stock
$1.70/ unit
100 $1.70
250 $1.51
500 $1.36
1,000 $1.26
An engraved nameplate is the answer when the information must outlive every printing method. Engraving removes material rather than depositing ink, so it cannot fade, and on metal it survives heat, solvent and abrasion that would destroy any label. Choose it for permanent equipment identification, asset numbers on capital plant, and anywhere a label has already failed once. The trade-off is that it cannot be changed: an engraved plate that is wrong is a plate you replace, so it suits information that is genuinely permanent rather than anything that gets revised.
A nameplate is permanent and its context is not. The plate says what the equipment is; the record says what has happened to it, who maintains it and what is due. Pairing an unchangeable physical identifier with a mutable history is close to ideal, because the identifier can never drift while the history stays current. For capital equipment that will outlast several owners and maintenance contractors, an engraved serial that resolves to a living record is the most durable identification arrangement available here.
The record mechanics are the same for every artifact and are set out on how inspection records work.
Engraving is proofed carefully because it cannot be corrected after the fact, so the proof stage matters more on this artifact than on any other. Plates are cut individually rather than printed in a run, so engraving takes longer in production than any printed item here. They arrive with the engraved identifier already bound to a record, so the first scan associates the plate with the equipment it was fixed to. Because nameplates are permanent, this is usually a one-time order per asset rather than a recurring purchase.
The full sequence, including what the proof shows and how approval works, is on how ordering works.
Because engraving removes material rather than depositing ink, so there is nothing to fade, dissolve or abrade away. It is the right answer where a label has already failed, or where the equipment will outlive several maintenance contracts and needs to stay identifiable throughout.
No, which is the point and also the constraint. Anything that gets revised belongs on a label or a placard. Reserve engraving for information that is genuinely permanent, such as an asset number, and let the record carry everything that changes.
Plates are cut individually rather than printed in a run, so engraving takes longer than any printed item here. Proof carefully: an engraving error is a replacement rather than a correction, which is why we render the proof at actual size and ask you to approve it explicitly.